Pneuflo Parabolic Airway Resistors

The resistors supplied with the TTL are used in constructing the airway to create varying levels of airway resistance. Each resistor consists of a thin metal disk held in a metal housing. An accurately machined orifice in each disk determines its’ resistance value. These resistors are each carefully calibrated to ensure that they perform within specified limits. Typically, one upper and two lower airway resistors are used when ventilating both lungs, and a single resistor is used when working with a single lung.

The Pneuflo resistors exhibit parabolic characteristics, in regards to pressure change as a function of flow. This nonlinear, parabolic characteristic is similar to that seen in standard endotracheal tubes. The specific pressure-flow relationships of the Rp5, Rp20, Rp50, Rp200, and Rp500 resistors are shown below.

Pneuflo Parabolic Airway Resistors Pressure-Flow Relationships Chart

Adult and Infant Pneuflo Parabolic Resistor pressure-flow chart

Most experts believe that the bronchi and bronchioles exhibit pressure-flow characteristics which are nearly linear. Linear resistors are not provided with the TTL because of their fragile nature and prohibitive manufacturing cost.

You can also download a PDF of this page here.